Digital Watchdog VMAXD1 16 User Manual page 22

Alarm
This feature is used to generate alarms through the PTZ Preset, E-mail, Spot 1, Popup, and/or Callback in case of an event. You can
configure up to eight presets (1-8).
Popup function is to inform event occurrence to the user through a
warning window in the real-time monitoring mode.
Buzzer: Makes a beep sound when event is triggered.
PTZ Preset: Set preset number. When event is triggered, PTZ camera will move to the selected preset.
E-mail: When an event is triggered, the VMAXD1 will send user an e-mail.
Setup your email at [Setup] > [Network Config] > [E-mail].
Relay: When an event is triggered, relay out will be activated.
Spot: When an event is triggered, user will receive popup on spot monitor.
Popup: In real time recording mode, a Warning window will appear. This window will inform the user when an event occurs.
Callback: This will transmit a signal to a callback server located at a remote site and will begin recording automatically.
Turn ON the Callback funtion.
Set your Callback Server IP, Port Number, User ID, and event type.
Select one of the registered users.
22