Digital Watchdog VMAXD1 16 User Manual page 30

Client Configuration
Go to [Setup] > [Network Config] > [Client Configuration].
The Ports need to be set in order for the VMAXD1 to connect to the client software(s) properly.
CMS (VMS) Port: This is used to connect the VMAXD1 to a CMS or VMS software. The default value is between 2000 and 2007. A
randomly chosen value can be used depending on the network environment.
Web Server Port :This is used to connect the VMAXD1 to a remote software. The default value is 80. If 80 is blocked, use a random
number over 2000.
UPnP (Auto Port): This is used to connect the VMAXD1 to the network using a router.
E-mail
Set your VMAXD1 to send e-mail notifications automatically when an event occurs.
Go to [Setup] > [Network Config] > [E-mail].
Check [Address#] field, and enter e-mail address.
To attach an image with the e-mail, check Still Image Attachment.
Enter sender's email address in the [From] field.
To use another e-mail server, set the [Relay SMTP] field.
To use this feature, go to [Setup] > [Recording] > [Alarm] and make sure E-mail is set to ON.
Also go to [Setup] > [Network Config] > [Network] and make sure the Primary DNS and/or Secondary DNS are configured.
30