Sirius XM RAdio Onyx EZ User Manual page 77

Troubleshooting
If this happens:
No audio when using the Aux In
Cable or Cassette Adapter
Audio sounds too soft
Audio fades or has static when
listening
Try this:
• Check all cables between your Onyx EZ and your
vehicle's stereo system for a firm and secure
connection .
• Ensure you have selected the proper input source
on your vehicle's stereo system .
• If you are using the Vehicle Dock that came with
the Universal Xpress Car Kit, ensure that the
FM Transmitter in the Onyx EZ is turned Off, and
increase the audio level of the Onyx EZ . Refer to
"Set Audio Level" on page 65 .
• Raise the volume of your stereo system or increase
the audio level of your Onyx EZ until the sound
quality improves . Refer to "Set Audio Level" on
page 65 .
• Check all cables for a firm and secure connection .
• If you are using PowerConnect to listen via your
vehicle's FM radio, and the problem persists, it
most likely is interference from another commercial
or broadcast FM station . You will need to find an
unused or available FM channel in your area . Refer
to "Find Available FM Channels in Your Area" on
page 59 .
• If you are using PowerConnect, and you cannot
solve the audio problem, try connecting the audio
using the Aux In Cable or a Cassette Adapter .
(Refer to page 33 and page 36 .) If you cannot
use those solutions, consider using an FM Direct
Adapter . (Refer to page 41 .)
77