Sirius XM RAdio Onyx EZ User Manual page 39

Vehicle Installation
tune through every FM channel one-by-one . Turn on your vehicle's FM radio . Start
at 88 . 1 and use the 'Manual' tune function on your vehicle's FM radio to tune
through each FM channel one-by-one (88 . 1 followed by 88 .3 etc .) to locate
channels that aren't being used by a local FM radio station . Write down each FM
channel that has only static or silence on it, until you reach 107 . 9 .
6. Ensure Onyx EZ is tuned to channel 1 . Upon power up, Onyx EZ should
tune to channel 1 by default, when it's not yet activated . If it's not on
channel 1, refer to "Listening to Satellite Radio" on page 47 to learn
about how to tune a channel .
7. Pick the first FM channel on your list from step 5 . Turn on your vehicle's
FM radio (if you have not already done so) and tune it to this FM channel .
NOTE! If you are using the Vehicle Dock from the Universal
Xpress Car Kit instead of the PowerConnect Vehicle Dock
which came with your Onyx EZ, you will have to disable
AUX Detect . Refer to "Using the Vehicle Dock From the
Universal Xpress Car Kit" on page 72, and complete the
additional instructions before continuing with the next
step .
8. Set your Onyx EZ to transmit on the same FM channel that you have selected in
step 7:
i . Press menu .
ii . Press to scroll to and highlight FM
Settings and press the Select button .
iii . FM Channels will be highlighted .
If it is not highlighted, turn on the
FM transmitter by highlighting FM
transmitter and pressing Select .
iv . Once the FM Transmitter is On, select
FM Channels and press
and highlight the storage location
FM 1
FM 2
FM 3
FM 4
to scroll to
FM 5
FM Channels
97.9
current
_ _ _
_ _ _
_ _ _
_ _ _
39