Using The Vehicle Dock From The Universal Xpress Car Kit - Sirius XM RAdio Onyx EZ User Manual

Configuring Your Onyx EZ

Using the Vehicle Dock From the Universal Xpress Car Kit

If you have chosen to use the Vehicle Dock from the
Universal Xpress Car Kit rather than the Vehicle Dock
included with your Onyx EZ radio, you will need to
complete some additional installation steps . When you have
completed these additional steps, you can continue with the
installation of your Onyx EZ .
When you are using the Universal Xpress Vehicle Dock,
the screen will initially display "AUX Connected" when you
power on your Onyx EZ . Ignore this message . Once you
have completed the steps below, it will not be displayed
again .
If you are connecting the audio using PowerConnect (or
FMDA):
1. Disable the AUX Detect feature . Refer to "AUX Detect" on page 67, and
disable AUX Detect .
2. Turn the FM Transmitter in the Onyx EZ On . Refer to "Turn FM Transmitter
On/Off" on page 73, and turn the FM Transmitter On .
3. Continue with the installation .
If you are connecting the audio using the Aux In Cable or Cassette Adapter:
1. Disable the AUX Detect feature . Refer to "AUX Detect" on page 67, and
disable AUX Detect .
TIP! The FM Transmitter must be Off . To verify that the FM Transmitter is Off, refer
to "Turn FM Transmitter On/Off" on page 73 .
2. Continue with the installation .
72
AUX Connected
Audio enabled through
auxiliary line. FM turned OFF.