Area - Sirius XM RAdio Onyx EZ User Manual

Configuring Your Onyx EZ
Find Available FM Channels in Your Area
Before attempting any of the procedures below, you should park your vehicle
in a safe location . Do not attempt to set up your FM channels or any Onyx EZ
function while driving .
PowerConnect allows you to listen to SiriusXM audio through your vehicle's FM
radio . You will first need to find an available FM channel, which is a channel that
is not being used by an FM radio station in your area . When you tune your FM
radio to an available channel, you should only hear static or silence – not talk or
music .
Once you have found an available channel, you need to tune Onyx EZ's built-in
transmitter to the same channel to receive XM audio through your vehicle's
radio .
To find an available FM channel:
• Manually tune through your local FM channels
1. Manually tune through your local FM channels on your vehicle's FM radio . Turn
on your vehicle's FM radio . Start at 88 . 1 and use the 'Manual' tune function
on your vehicle's FM radio to tune through each FM channel one-by-one (88 . 1
followed by 88 .3 etc .) to locate channels that aren't being used by a local
FM radio station . Write down each FM channel that has only static or silence
on it, until you reach 107 . 9 . Once you have created your list of available FM
channels, you will need to find the one that provides the best match for Onyx
EZ .
2. Tune Onyx EZ to a favourite XM channel (or to channel 1, if it's not yet
activated) . Pick the first FM channel on your list and tune the FM radio to
that channel . Then tune the Onyx EZ to the same FM channel . (Refer to "Set
and Select an FM Channel" on page 61 .) You should hear the XM channel
through your vehicle's radio . If you are satisfied with the sound quality, you're
59