Sirius XM RAdio Onyx EZ User Manual page 14

Vehicle Installation
Installing the Vent Mount:
IMPORTANT! To make the cable connections easier, wait until after you have
connected all the cables to the dock before you attach the Vent Mount to a vent .
1. Locate a vent with horizontal louvers sturdy
enough to hold your PowerConnect Vehicle
Dock and Radio .
2. If the vent louvers in your vehicle are
recessed, you may need to use the longer
vent clamps with the Vent Mount . If so,
remove the shorter vent clamps and install
the longer ones into the Vent Mount . Be sure
to observe the orientation of the vent clamps
as shown, and replace both vent clamps .
Vent Mount Rear View
Slide Left Clamp to Pull Clamp Out
Hole in Center
14
Insert Round End
of the Extended
Clamp in the
Towards You Center Hole
Round End
Extended Vent Clamps
Vent Mount
Rear View
Short Vent
Clamps
Slide Clamp to Left
to Complete Repeat to Replace
Installation
Orientation
Right Clamp