Configuring Your Onyx EZ
Demo Mode
Your Onyx EZ has a demo mode that starts playing when, for a prolonged period
of time (more than 5 minutes), the radio either detects it's not connected to the
antenna, or the antenna stops receiving a signal . It disappears when the antenna
is connected properly or when the radio starts receiving a signal . You can also
exit demo mode at any time, by pressing and holding the Select button for 10
seconds . If desired, you can also manually put the Onyx EZ in demo mode .
The ability for Onyx EZ to enter demo mode is
enabled by default . If you don't want Onyx EZ
to ever enter the demo mode, you can disable
the demo feature . You can enable it again at
another time if desired .
To enable or disable the demo mode:
1. Press menu .
2. Press
to scroll to and highlight Demo
Mode and press the Select button .
3. Status will be highlighted . Press the
Select button to toggle the setting
between enabled or disabled . (Repeatedly
pressing the Select button toggles
between the choices .)
4. If you have selected disabled, press and
hold menu to return to the main display
screen . If you have selected enabled
continue with step 5 .
5. Press
to scroll to and highlight Enter
70
Demo Mode
Status
Enter Demo Mode
Press Select to
change setting
Demo Mode
Entering Demo Mode.
Press & Hold Select
for 10 seconds to exit
enabled