Sirius XM RAdio Onyx EZ User Manual page 38

Vehicle Installation
Option 3: PowerConnect Installation Instructions
1. Insert your Onyx EZ into the dock .
2. Power on your Onyx EZ by pressing the Power
button .
3. Be sure the vehicle is outside and the antenna has a
clear view of the sky . Verify that you are receiving
the XM signal . There should at least be one bar on
the lower left corner of the main display screen that
denotes antenna signal strength . You can
also press menu and then press
scroll to and highlight Signal Indicator .
Press the Select button . The Satellite and
Terrestrial bars show the strength of the
signal being received . If the signal
reception is good, press and hold menu to
return to the main display screen . You are
ready to make the audio connection .
4. You'll first need to find an available FM
channel . An available FM channel is one
that's not being used by an FM radio station in your area . When you tune
your FM radio to an available channel, you should only hear static or silence
– not talk or music . To find an available FM channel:
• Manually tune through your local FM channels on your vehicle's FM radio.
Locate and create a list of channels that aren't being used by any FM
radio station . Write down the list . Once you have created your list of
available FM channels, you will need to find the one that provides the best
match for Onyx EZ .
TIP! You'll need to use the 'Manual' tune function on your vehicle's FM radio to
38
to Signal Indicator
-
-
SATELLITE
TERRESTRIAL
+
+