Using Your Onyx EZ
FM Presets
FM presets make it easy to quickly access stored FM channels and choose a new FM
channel from them .
Use FM presets when you use PowerConnect to listen to your Onyx EZ through
your vehicle's FM radio . (Refer to "Option 3: PowerConnect Installation
Instructions" on page 38 for more information .)
To start using a different FM preset:
1. Press FM to display the current FM
preset .
2. To display and select the next FM preset,
press FM . The radio will tune to the
displayed FM channel . If the preset is the
one you want, press menu or wait for the
screen to timeout .
3. Repeatedly pressing FM will cycle
through the FM presets .
4. Set your vehicle's FM radio to the same
FM channel .
IMPORTANT! You need to ensure that your
vehicle's FM radio is tuned to the same FM
channel .
TIP! To configure the list of preset FM
channels, you need to find available FM
channels in your area . Refer to "Find
Available FM Channels in Your Area" on
page 59 . Next, refer to "Set and Select
an FM Channel" on page 61 .
52
99.3 FM
Set your vehicle
radio to the above
channel to enable
audio.
103.7 FM
Set your vehicle
radio to the above
channel to enable
audio.