Step 5: Connect The Magnetic Mount - Sirius XM RAdio Onyx EZ User Manual

Vehicle Installation
Pickup Truck:
1. Use a blunt plastic putty knife or similar blunt tool to lift the rubber
molding around the windshield and tuck the antenna cable underneath
it .
2. Continue tucking the cable underneath the windshield molding around
the windshield to the lowest corner .
3. At the lowest corner of the windshield, route the cable out of the
windshield molding and into the rubber weather stripping around the
door opening . Lift the weather stripping from the opening and tuck the
cable inside it, then replace the weather stripping . Run the cable inside
of the weather stripping to the bottom of the door opening .
4. Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard . Coil any
excess cable in a hidden location, such
as under the carpet, keeping it away
from any vehicle pedals or controls .
Secure the excess cable with wire ties .
5. Bring the end of the cable out at the
PowerConnect Vehicle Dock location .
Leave yourself enough cable so you
can easily connect it to the antenna
connector of the dock .
6. Continue with "Step 5: Connect
the Magnetic Mount Antenna and
PowerConnect Power Adapter" on
page 32 .
31