Step 2: Install The Dash Or Vent Mount - Sirius XM RAdio Onyx EZ User Manual

Vehicle Installation

Step 2: Install the Dash or Vent Mount

Follow the instructions on the next several pages for the mounting method you
have selected .
NOTE! The PowerConnect Vehicle Dock included with the this Vehicle Kit is
compatible with the T-slot style Dash and Vent Mounts . If you have an existing Dash
Mount or Vent Mount in your vehicle, you can continue to use it with this dock, and
skip this step .
Installing the Dash Mount:
CAUTION! The adhesive used on the Adhesive Mount may be
difficult to remove . Do not install this mount on leather surfaces
(contact your automobile dealership if you are unsure about your
dash surface), and make sure the air temperature is at least 60°F
(15°C) during installation . If it's not at least 60°F, turn on the
heater in your vehicle to bring the temperature up to 60°F .
1. Locate a flat surface for the Adhesive Mount . Make sure
there is ample room for the PowerConnect Vehicle Dock and Radio when
installed .
2. Set the orientation of the Adhesive Mount before adhering it . Loosen the
knob and adjust the adhesive foot for the location you selected in "Step 1:
Choose a Location for Your Radio" on page 10 .
Option 1
Option 3
3. The dock mounting plate can be tilted in different directions . Adjust as
12
Option 2 Option 4