Advertisement
Available languages
Available languages
2.
Safety
This Operation Manual contains basic instructions, which must be observed
during mounting, operation and maintenance. Therefore the Operation Manual
should be carefully read before installation and start-up by the person in charge
of the installation as well as by all other technical personnel/operators and
should at all times be available at the installation site.
It is important that not only all general safety measures appearing under the
above heading "Safety" should be adhered to but also all other, specialized
safety instructions appearing under the other headings, e.g. for private use.
2.1 Symbols for Safety Instructions in the Operation Manual
All safety warnings contained in the Operation Manual which, when ignored,
may constitute danger for humans, are specially marked with general danger
symbols:
Safety symbol according to DIN 4844 - W 9
In case of electrical hazards they are specially marked with:
Safety symbol according to DIN 4844 – W8
For safety warning which, when ignored may constitute a hazard for the
machine and its functions as well as for the surrounding, the word
is added.
Symbols directly attached to the machine like e.g.
must be heeded and kept fully legible at all times.
CAUTION
– arrow denoting the direction of rotation
– symbol for fluid connections
41
Advertisement
