REMOTE CONTROL MODELS
1. Crank the engine over while pushing the key in to engage the
choke solenoid.
2. After the engine has started, release the key.
Gear Shifting
IMPORTANT: Never shift outboard into gear unless engine speed
is at idle. Do not shift outboard into reverse when the engine is not
running.
•
Your outboard has three gear shift positions to provide
operation: Forward (F), Neutral (N), and Reverse (R).
•
Tiller Handle Models ‑ Reduce engine speed to idle before
shifting.
a -
(R) Reverse
b -
(N) Neutral
•
Remote Control Models ‑ When shifting, always stop at
neutral position and allow the engine speed to return to idle.
•
Always shift outboard into gear with a quick motion.
•
After shifting outboard into gear, advance the remote control
lever or rotate the throttle grip (tiller handle) to increase speed.
OPERATION
a
b
c
N
F
69
28595
c -
(F) Forward
R
27237