Mercury 8 User Manual page 126

1. To aid in future removal of the propeller, liberally coat the
propeller shaft splines with one of the following Mercury/
Quicksilver products:
Tube Ref No.
Anti-Corrosion
94
Grease
2-4-C Marine
95
Lubricant with Teflon
2. Install front thrust washer, propeller, rear thrust hub, and
propeller nut onto the shaft.
3. Place a block of wood between gearcase and propeller to
prevent rotation and tighten propeller nut. Secure propeller nut
to the shaft with cotter pin.
a - Cotter pin
b - Propeller nut
c - Rear thrust washer
ENGINE INSTALLATION
Description
a
b
c
d
Where Used
Propeller shaft
splines
Propeller shaft
splines
e
27094
d - Propeller
e - Front thrust washer
118
Part No.
92-802867Q
1
92-802859A1