Installing Brickware - Funkwerk bintec R230a Quick Install Manual

quick_reference.book Page 14 Tuesday, April 4, 2006 9:26 AM
3
Configuration
Enter gateway IP
address at PC
14 bintec User's Guide
Your PC should now fulfill all the conditions for the configuration of your gate-
way using the HTML Wizard.
Continue by entering the IP address of your gateway into the PC configuration
as follows:
3. Enter the IP address of your gateway into Default gateway in Internet
➜
Protocol (TCP/IP) Properties.
If you do not use the preconfigured IP address of the gateway nor have yet
defined one according to your network requirements, carry out the first
steps of the gateway configuration. You can perform an automatic determi-
nation of a free IP address within your network. Enter the resulting IP ad-
dress here (see "Configuring the Gateway" on page
4. Enter the IP address of your gateway into Use the following DNS server
addresses.
5. Click OK.
6. Close the dialog box with OK.
The PC now has an IP configuration and can access the Internet via the gate-
way.
3.1.3

Installing BRICKware

BRICKware contains a number of programs to help you when working
with your gateway. The installation is optional.
17).
Quick Install Guide