１-４２ System - Dynamic CCTV MX16 Manual

① Go to {Menu}  {Setup}  {Network}  {Bandwidth}.
② Save after entering the detail.
Image Quality
Bandwidth Limit
１-４２
System
In {Menu}  {Setup}  {System}, the user can configure the system and the auxiliary features of the system.
1. DVR Name
2. ID For Remote Controller
3. ID For Key Controller
4. User Registration
5. Admin. Password
6. Upgrade
7. Factory Setup
8. RS232C Port
9. Alarm Action
10. Alarm Duration
11. Menu Time Out
12. Language
[Figure 6-42. Bandwidth Window]
Adjust quality of the image, as the value increases, the
compression rate gets higher and image quality gets low.
However the transmission rate gets higher.
You can set the network bandwidth between 40 ~
4000kbps.
As the value increases, the network transmission speed
gets faster.
Select Off if you do not wish to limit the network bandwidth.
Used to name the DVR device.
Used to name the remote controller for running the system.
Unique system controller number setting.
Used to register, add, or delete users.
Used to set the password of the Local System Administrator.
Upgrades the system firmware.
Initialize Setup.(Factory default value, except for the network
value)
Use of the RS232C port.
Set the alarm On/Off and alarm format.
Set the alarm time by continuous/5/10/15/User Setup.
Used to set the time for exiting the System Setup menu
automatically and displaying the real-time monitoring screen.
System OSD language setting
69
Operating Instruction & User's Guide
Formatted: Font color: Auto
Formatted: Font color: Auto