１-４２-６ Admin. Password; １-４２-７ Upgrade - Dynamic CCTV MX16 Manual

(2) Add Users
① Move to {Menu}  {Setup}  {System}  {User Registration}  {User Addition}.
② On the user registration window, enter the ID and the password. (Up to four users can be registered. The
user ID and password may contain up to 30 English letters.)
③ After entering the user ID and password, select the user authorization.
(3) Delete Users
① Move to {Menu}  {Setup}  {System}  {User Registration}  {User Delete}.
② On the selection window, select the user you want to delete using the arrow keys and the Select button.
１-４２-６ Admin. Password
① Move to {Menu}  {Setup}  {System}  {5. Admin. Password}.
② On the password input window, enter a password using the numeric buttons of the remote controller or the
arrow keys and the Select button.(the password can contain up to five digits.)
１-４２-７ Upgrade
The product can be easily upgraded through the use of an external storage device or a portable storage device
with USB 2.0 port.
① Find and copy the upgrade file to the highest folder in the external storage device or portable storage
device supporting USB 2.0.
1) When copying an upgrade file from the PC, delete the USB device properly from
the PC and disconnect it from the USB port.
2) If the USB device is disconnected from the USB port while the upgrade file is
being copied, the DVR system may not automatically detect the file.
3) Upgrading is impossible if the HDD is not mounted.
Removing USB during the upgrade in progress may cause damage on the system.
Operating Instruction & User's Guide
72