Chapter 6. Setup; １-３６ Time - Dynamic CCTV MX16 Manual

(6) Focus Control
① Control Focus using {Far} / {Near} buttons.
(7) Preset {Set}
Preset? Using horizontal/vertical/Zoon/Focus movement of PTZ Camera, zoom or focus
a certain spot of the image by designating the coordinates and move to the designated
coordinates quickly.
① Move to a desired spot for Preset by using Horizontal/Vertical, Zoom and Focus.
② Select 1~8 spots by pressing {Preset}.
③ Press {Set} button to complete Preset setup.
④ Repeat ①-③ to another Preset. Up to 8 Preset are available.
(8) Preset {Go}
① Select Preset Number by using {Preset} button.
② Pressing {Go} button moves PTZ camera by Horizontal/Vertical, Zoom and Focus movements to the
Preset spot that is selected in ①.
(9) Home Position Time
If there are no controlling signals to PTZ camera after a certain time, it goes automatically to the Preset No.1
position as Preset No. 1 is designated as Home Position.
① Select {Home Position Time} using the arrow keys and the Select button.
② Select {Off/1 minuet /5 minuets /10 minuets /User Setup} using the arrow keys and the Select button.
(10) Menu
Select Menu button to shift to 1 channel view over PTZ set camera. PTZ Menu is controllable.

Chapter 6. Setup

１-３６
Time
※ Function Description
1. Time Synchronization
1) Synchronization with the NTP server
The time is synchronized every hour with the NTP Server.
A. Automatic Setup
The nearest server from the user's zone will be selected for connection. If the connection fails, the next
nearest server will be chosen.
B. User Setup
The user sets the URL or IP for the NTP server. If connection is not established, a message will be sent to
the user, and the related log, saved.
If synchronization with the NTP server fails, synchronization with RTC will be established.
3) Synchronization with the DVR Time Server
The DTS server is executed in the DVR system and the time is synchronized every hour. DTS clients of
DVR series referring to the DTS synchronize the time of the DVR system with DTS.
When the DTS time or a zone is changed, the change is reflected on DVR series belonging to the network
(the synchronization signals are broadcasted without passing through the router or gateway). The DVR time
server does not support automatic connection.
2. Daylight saving time (DST) setup
Regardless of whether NTP server or DST server is referred to, DST is automatically processed according
to the time.
3. User time setup
The user can set the time directly.
For the NTP client setup, the user can read the time but not change it.
Move to {Menu}  {Setup}  {Time} to set up Time Function.
Operating Instruction & User's Guide
40