Table of Contents
Advertisement
mail/ Relay01/ System check].
① Move to {Menu} {Setup} {System} {9. Alarm}.
② Select [Alarm/E-mail/Relay01/System Check]. The user can select all by ticking as shown below.
※ System Check
System Check is to pop up the System Check Window on the monitoring screen. It shows [Video
Signal loss/ HDD full/ FAN fail/ HDD fail/ HDD warning].
１-４２-１１ Alarm Setup
① It sets the duration of the alarm triggered by the recording and system event.
② Move to {Menu} {Setup} {System} {10. Alarm}.
③ In the selection window, set Alarm out time using the arrow keys and the Select button.
１-４２-１２ Menu Time Out
If no input is made in the System Setup menu using the front buttons, remote controller, or mouse, the system
[Figure 6-47. Alarm]
75
Operating Instruction & User's Guide
Advertisement
Table of Contents
