１-１９ Dvr Information View; Chapter 5. System Operation; １-２０ Starting And Exiting The System; １-２０-１ Starting The System - Dynamic CCTV MX16 Manual

１-１９
DVR Information View
① Move to {Menu}  {Miscellaneous}  {DVR Info.}.
Detail information for product functions are described below in this manual.

Chapter 5. System Operation

１-２０
Starting and Exiting the System
１-２０-１ Starting the System
With the power connected, press the Power button.
① After the system is booted, images of all connected channels will be displayed.
１-２０-２ Exiting the System
※ The default password for the local administrator is "00000."
※ To change the password, select {Main Setup}  {System}  {Local Administrator's
Password}.
Press the Power button on the remote controller.
On the password input screen, enter a new password using the numeric buttons and the arrow keys.
After authentication is completed, the system will be terminated.
１-２１
Monitoring
Various Screen Division and Auto Sequence.
Channel Grouping.
Spot
Menu Controlling in Monitoring Mode
After the system is booted, images will be displayed on a screen divided into [16/9/4] according to its setting. In
case of 16 channels DVR, the screen can be divided into 1, 4, 9, and 16 sub-screens. Auto-sequencing from is
available in each mode.
１-２１-１ Screen Division and Auto Sequence
Full Screen (16 groups)
Use the Full Screen mode.
To view a certain channel, select the desired channel using the numeric buttons.
4Sub-Screen (4 groups)
Use the 4 Sub-Screen button.
9Sub-Screen (2 groups)
Operating Instruction & User's Guide
18