Table of Contents
Advertisement
Reverse Frame by Frame
Pause
Frame by Frame
１-８
Mouse
The USB mouse can be used to operate the system. The mouse pointer as below photo will be shown if a mouse
is connected to USB terminal at front panel.
Mouse Control supports features are shown below.
Click on the right button
Click on the left button
Double click on the left button
Click and drag the left button
Chapter 4. DVR Operation Setup
１-９
Storage Installation
※ The recommended HDD specification are shown below.
１-１０
MX series Storage Installation
※ Recommended HDD Specification
Type
SATA I, II
3.5" 1, 2 Flat
Reverse Frame by Frame
Pause
Frame by Frame
Monitoring Mode / Move from Play Mode to
Monitoring Menu / Pop up or remove Play
Menu.
Show sub-folder of the certain Menu window.
Select Menu.
Select Menu.
Move a certain window.
Size
Capacity
Up to 2 TB
1) Using a screw driver, unscrew and take off the top case of the product
1) Normal termination of the system and fully unplugged power
code are required before conducting HDD installation.
2) Touch a grounded metal substance or ground yourself
before installing HDD in order to reduce static electricity. Static
electricity may cause a malfunction of the product.
3) After installing HDD, Do not connect to power supply with the
top case opened. The top case must be covered before usage.
2) Unscrew and separate the HDD bay.
Align screw holes and screw and fix additional HDD onto HDD bay.
13
Buffer
RPM
over 8MB
over 7200
Operating Instruction & User's Guide
Formatted: Font: 9 pt, Font color:
Auto
Formatted: Font: 9 pt, Font color:
Auto
Advertisement
Table of Contents
