１-５ Installation And Connection; １-５-１ Basic Connection - Dynamic CCTV MX16 Manual

PTZ Camera Control Connection
RS485
5
Sensor / Relay Connection
DIO
Network Connection (ADSL, Cable Modem, Ethernet 10/100/1000
6 Ethernet
Base-T)
VGA Monitor or LCD Monitor Connection
7 VGA-OUT
Audio Output Connection(Line Only Output)
8 AUDIO OUT
CCTV Monitor Connection(Divided Screen)
9 TV
Video Camera Connection
10 CAMERA IN
１-５
Installation and Connection
[Figure 2-1. Basic Connection and Device Connection]
[Figure 2-2. MX16 Connection and Device Connection]
１-５-１ Basic Connection
By referring to above [Figure 2-1] and [Figure 2-2], Connect the CCTV camera, CCTV monitor (or VGA monitor),
and USB mouse to the DVR and set up CONFIG SWITCH.
Connected Device
CCTV camera
1
CCTV monitor
2
Rear Panel Video Input
Rear Panel TV
9
Terminal Block
RJ-45
D-SUB 15P
RCA
BNC
BNC
DVR Terminal
Operating Instruction & User's Guide