Table of Contents
Advertisement
１-１１
Power ON.
Check the adapter (12VDC/3.5A) and connect the power. Booting will be initiated by pressing the power button in
the front panel. Booting is progressed step by step by VGA outputting or a color bar test screen for TV outputting,
Live screen and a clock.
Menu widow pops up by clicking the right button of the mouse or pressing [MENU] button in the front panel as
shown below.
ID and Password are required for a initial installation. Default ID and Password are shown below.
[ Local Admin : 00000 ]
[ User1 : 1111111 ] [ User2 : 2222222 ] [ User3 : 3333333 ] [ User4 : 4444444 ]
１-１２
Storage Setup
① Select {Menu} {Setup} {Storage Device}. As shown below, newly installed HDD is shown at
{NEW} tab.
Indication of "{ }" refers to one provision of the menu. Indication of "" refers to a sub-
provision. Example> {Menu} {Setup} : go to Setup that is a sub-provision of Menu.
3) Screw the additional HDD bay to current HDD bay
4) Connect the power cable and data cable to HDD.
Reassemble the top case by reversing 1) to finalizing HDD installation.
[Figure 4-5. Menu Window]
14
Operating Instruction & User's Guide
Advertisement
Table of Contents
