１-３４ Snapshot; １-３５ Ptz Camera Control; １-３５-１ Conditions For Using The Ptz; １-３５-２ Ptz Mode - Dynamic CCTV MX16 Manual

storage space gets smaller than the set value.
⑧ Overwriting : Overwriting On/Off.
１-３４
Snapshot
The Snapshot function lets the user create a JPG file in real-time monitoring, playback, search, or log mode and
back up the image data.
① To back up the currently displayed image, select {Menu}  {Backup}  {Snapshot} in real-time
monitoring mode, or {Menu}  {Backup}  {Snapshot} in Playback mode.
② When only one USB2.0 backup device (excluding ODD devices) is searched, the JPG file is stored in the
same device.
③ If there are no or more than two USB2.0 storage devices (excluding ODD devices), a window for selecting
the device will be displayed.
④ If the selected device is an ODD device, a prompt asking whether to back up the ODD device will be
displayed.
１-３５
PTZ Camera Control
１-３５-１ Conditions for Using the PTZ
① The PTZ camera must be connected to the system. For external connection, refer to {2-4-2 Connection
of Other Devices}  {4) PTZ Camera/Keyboard Controller}.
② Select {Menu}  {Setup}  {PTZ} and check whether the PTZ camera setting is appropriate.
※ For more information on the PTZ camera setting, select {Menu}  {Setup}  {PTZ}.
１-３５-２ PTZ Mode
① In real-time monitoring mode, select {Menu}  {PTZ Control}.
② PTZ Control Window shows up. PTZ Control Window can be toggled as {Max.} or {Min.} as shown below.
[Figure 5-27. PTZ Control Window (Max. Mode (Left) / Min. Mode (Right))]
Operating Instruction & User's Guide
38
Formatted: Font color: Auto