Safety Instruction; Maintainance Guidelines - Intelix Psychologist User Manual

Safety Instruction

Note: Read all the directions carefully before use.
Take all the precautions usually taken with electrical equipment. To protect both the users and the
equipment:
Grounding
Make sure both the Matrix and the devices connected to it are properly grounded.
Power Supply
Use only the power supply provided by the manufacturer or one that meets the manufacturer's
specifications.
Cords and Cables
Route all cords and cables so that they will not be tripping hazards nor subject to damage (from
being run over or pinched) that could cause them to become shock hazards. Pay particular attention
to cords at plugs, convenience receptacles, and the point where they enter the Matrix and the Mini-
Mixer remote controls.
Fire
If the Matrix or other electrical equipment catches fire, extinguish the fire using a carbon dioxide
(CO ) extinguisher or any extinguisher rated for electrical fires. Do not use water or a water extin-
2
guisher.

Maintainance Guidelines

Electronic devices operate best in clean, well-ventilated environments. The Matrix unit has a greater
than normal density of electronic components, and so generates more heat than the average electronic
device. Place the Matrix where it will be well-ventilated, well away from other heat-generating equip-
ment such as amplifiers.
The Mini-Mixer remote controllers should also be kept clean. Route all cords and cables so that they
will not be tripping hazards nor subject to damage from being run over or pinched. To minimize hum
in the System, avoid placing the remotes and cables near EMF-producing devices such as electrical
motors, fluorescent lights, AC power lines, SCR dimmers, etc.
The remotes may be left connected and powered when not in use.
Psychologist Mixer User Manual
Psychologist Mixer User Manual
5