Reo Bus Connections - Intelix Psychologist User Manual

Psychologist Mixer User Manual
Power is fed to all Mini-Mixers via two pins on each 9-pin D connector. See below for a wiring
diagram. For DC power pin 6 is power ground and pin 9 is power plus (+). An external power supply
that provides the power connection may be either AC or DC. If DC, positive voltage should be
connected to pin 9, and ground connected to pin 6. The voltage should be 9 to 12 volts.
Note: The color code shown below is specific for Gepco 6608, the cable recommended by Intelix.

ReO Bus Connections

The ReO bus that connects the minimixer remotes to the matrix mixer has the following pinout.
Psychologist Mixer User Manual
19