Lanyard Stop Switch - Mercury 225 User Manual

Disengagement of a steering link rod can result in the boat taking a full, sudden, sharp turn. This potentially
violent action can cause occupants to be thrown overboard exposing them to serious injury or death.
a - Self-locking nut (2)

Lanyard Stop Switch

The purpose of a lanyard stop switch is to turn off the engine when the operator moves far enough away from the
operator's position (as in accidental ejection from the operator's position) to activate the switch. Tiller handle
outboards and some remote control units are equipped with a lanyard stop switch. A lanyard stop switch can be
installed as an accessory - generally on the dashboard or side adjacent to the operator's position.
The lanyard is a cord usually between 122 and 152 cm (4 and 5 feet) in length when stretched out, with an element
on one end made to be inserted into the switch and a snap on the other end for attaching to the operator. The
lanyard is coiled to make its at-rest condition as short as possible to minimize the likelihood of lanyard entanglement
with nearby objects. Its stretched-out length is made to minimize the likelihood of accidental activation should the
operator choose to move around in an area close to the normal operator's position. If it is desired to have a shorter
lanyard, wrap the lanyard around the operator's wrist or leg, or tie a knot in the lanyard.
a
a - Lanyard cord
Read the following Safety Information before proceeding.
Important Safety Information: The purpose of a lanyard stop switch is to stop the engine when the operator moves
far enough away from the operator's position to activate the switch. This would occur if the operator accidentally
falls overboard or moves within the boat a sufficient distance from the operator's position. Falling overboard and
accidental ejections are more likely to occur in certain types of boats such as low sided inflatables, bass boats,
high performance boats, and light, sensitive handling fishing boats operated by a hand tiller. Falling overboard and
accidental ejections are also likely to occur as a result of poor operating practices such as sitting on the back of
the seat or gunwale at planing speeds, standing at planing speeds, sitting on elevated fishing boat decks, operating
at planing speeds in shallow or obstacle infested waters, releasing your grip on a steering wheel or tiller handle
that is pulling in one direction, drinking alcohol or consuming drugs, or daring high speed boat maneuvers.
GENERAL INFORMATION
WARNING
!
a
ob01005
b
b - Lanyard stop switch
10
ob00310