Warranty Coverage And Exclusions - Mercury 225 User Manual

4-stroke
Hide thumbs Also See for 225:
Table of Contents

Advertisement

Corrosion damage caused by stray electrical currents (on-shore power connections, nearby boats, submerged
metal) is not covered by this corrosion warranty and should be protected against by the use of a corrosion protection
system, such as the Mercury Precision Parts or Quicksilver MerCathode system and/or Galvanic Isolator. Corrosion
damage caused by improper application of copper base anti-fouling paints is also not covered by this limited
warranty. If anti-fouling protection is required, Tri-Butyl-Tin-Adipate (TBTA) base anti-fouling paints are
recommended on Outboard and MerCruiser boating applications. In areas where TBTA base paints are prohibited
by law, copper base paints can be used on the hull and transom. Do not apply paint to the outboard or MerCruiser
product. In addition, care must be taken to avoid an electrical interconnection between the warranted product and
the paint. For MerCruiser product, an unpainted gap of at least 38 mm (1.5 in.) should be left around the transom
assembly. Refer to the Operation and Maintenance Manual for additional details.
For additional information regarding events and circumstances covered by this warranty, and those that are not,
see the Warranty Coverage section of the Operation and Maintenance Manual, incorporated by reference into this
warranty.
DISCLAIMERS AND LIMITATIONS:
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE EXTENT THAT THEY CANNOT BE
DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE
EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED
FROM COVERAGE UNDER THIS WARRANTY. SOME STATES/COUNTRIES DO NOT ALLOW
FOR THE DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A
RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE
TO STATE AND COUNTRY TO COUNTRY.

Warranty Coverage And Exclusions

The purpose of this section is to help eliminate some of the more common misunderstandings regarding warranty
coverage. The following information explains some of the types of services that are not covered by warranty. The
provisions set forth following have been incorporated by reference into the Three Year Limited Warranty Against
Corrosion Failure, the International Limited Outboard Warranty, and the United States and Canada Limited
Outboard Warranty.
Keep in mind that warranty covers repairs that are needed within the warranty period because of defects in material
and workmanship. Installation errors, accidents, normal wear, and a variety of other causes that affect the product
are not covered.
Warranty is limited to defects in material or workmanship, but only when the consumer sale is made in the country
to which distribution is authorized by us.
Should you have any questions concerning warranty coverage, contact your authorized dealer. They will be
pleased to answer any questions that you may have.
GENERAL EXCLUSIONS FROM WARRANTY
1.
Minor adjustments and tune-ups, including checking, cleaning or adjusting spark plugs, ignition components,
carburetor settings, filters, belts, controls, and checking lubrication made in connection with normal services.
2.
Factory installed jet drive units - Specific parts excluded from the warranty are: The jet drive impeller and jet
drive liner damaged by impact or wear, and water damaged drive shaft bearings as a result of improper
maintenance.
3.
Damage caused by neglect, lack of maintenance, accident, abnormal operation or improper installation or
service.
4.
Haul out, launch, towing charges, removal and/or replacement of boat partitions or material because of boat
design for necessary access to the product, all related transportation charges and/or travel time, etc.
Reasonable access must be provided to the product for warranty service. Customer must deliver product to
an authorized dealer.
5.
Additional service work requested by customer other than that necessary to satisfy the warranty obligation.
WARRANTY INFORMATION
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents