Timing Belt Inspection - Mercury 225 User Manual

d
c
a - Spare fuses
b - Main fuse 2 - 30 amp fuse
c - Main fuse 1 - 30 amp fuse
d - Starter relay - 30 amp fuse
e - Fuel pump - 5 amp fuse

Timing Belt Inspection

Inspect the timing belt and have it replaced by an authorized dealer if any of the following conditions are found.
1. Cracks in the back of the belt or in the base of the belt teeth.
2. Excessive wear at the roots of the cogs.
3. Rubber portion swollen by oil.
4. Belt surfaces roughened.
5. Signs of wear on edges or outer surfaces of belt.
MAINTENANCE
b
a
i
e
h
f
g
f - Main switch/trim switch - 20 amp fuse
g - Engine control unit/fuel injection pump - 20
amp fuse
h - Fuse puller
i - Good fuse
j - Blown fuse
46
j
ob01031
ob01032