Table of Contents
Advertisement
Industrial PCs MCR5000
6
D
RIVES
6.1 H
ARD DRIVES
The storage medium is selected according to the customer requirements. The following
options are available for storage:
Compact Flash memory:
Hard disk:
Warning:
Never remove or insert a hard disk during operation, when the device is powered.
6.2 DVD
DRIVE
The DVD drive is located beneath the locking plate. The device must be switched on for
opening the drive. After pushing the Eject button, the drawer jumps open and must be
pulled out completely. The CD/DVD is now placed with the opening on top of the centre
piece and carefully pushed downwards until the disk holder snaps in. Subsequently the
drive must be pushed in.
Note:
The DVD drive is of the slim-line drive type.
Warning:
If the device includes a DVD drive, this drive may only be operated perpendicular to
the installation position.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
/
COMPACT FLASH DRIVE
A compact flash memory is used. Its capacity depends on
the desired operating system and the additional programmes to be
installed.
A 2.5" hard disk with at least 60 GB (UDMA) is used. On delivery, the
hard disk is formatted in NTFS format (default for Windows XP).
/
INTEGRATED MODEL
(IDE
INTERFACE
(
)
NOTEBOOK
32
)
Advertisement
Table of Contents
