Table of Contents
Advertisement
Industrial PCs MCR5000
P
REPARATION FOR FIXING
Warning:
The MCR 5000 device is designated for installation with a TFT or plasma display.
Before the MCR 5000 can be fixed to the display, the respective brackets or
retainers for protecting the MCR 5000 from falling must be in place. The fall
protection measures must correspond to the "BGV C1" regulations.
Respective retainers must be installed above the MCR 5000 device. As soon as the
retainers have been installed, the device should be secured with these brackets or
retainers (as it can be seen in the figure, for example).
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
14
Advertisement
Table of Contents
