Environmental Conditions; Standards - ADS-tec MCR5000 User Manual

Industrial PCs MCR5000
1.6 E
NVIRONMENTAL CONDITIONS
The device may be operated under the following conditions. Failure to observe these
specifications will terminate any warranty for this device. Ads-tec cannot be held liable for
any damages arising due to improper use and handling.

Temperature for devices including a HDD
In operation
For storage

Temperature for devices including a compact flash memory
In operation
For storage

Humidity
In operation
For storage

Vibrations
In operation

Shock resistance
In operation
1.7 S
TANDARDS
This device complies with the requirements and protective aims of the following EC
regulations:

This device meets the test requirements for granting the CE sign and according to
the European test standards EN 61000-6-3: 2001+ A11:2004 and EN 61000-6-2:
2005

This device complies with the test requirements in accordance with DIN EN 60950-
1:2001 (VDE0805, IEC950) "Safety of Information Technology Equipment"

The device meets the DIN EN 60068-2-6 test requirements (sinus excitation).

The device meets the DIN EN 60068-2-27 test requirements (shock resistance
test).
Note:
A respective conformity declaration for the authority in charge is available on
request from the manufacturer.
All connected components, as well as cable connections must also meet these
requirements for compliance with the EMC legislation. For this reason, screened
bus and LAN cables including screened connectors must be used and installed
according to the instructions in this user manual.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
0 ... 40°C
-20 ... 60°C
(Because of the integrated maximum temperature memory)
0 ... 40°C
-20 ... 60°C
(Because of the integrated maximum temperature memory)
10 ... 85% without any condensate
10 ... 85% without any condensate
1 G, 10 ... 150 Hz
(DIN EN 60068-2-6)
15 G, with a half-wave of 11 ms duration
(DIN EN 60068-2-27)
8