Table of Contents
Advertisement
7 D
RIVES
7.1 H
ARD DRIVES
The storage medium is selected according to the customer requirements. The following
options are available for storage:
Compact Flash memory:
Hard disk:
Note:
Recommendation for selection of storage media with a basic installation:
Compact Flash memory: Windows CE.5.0 / Windows XP embedded
Hard disk:
Pos: 34 /Datentechnik/Laufwerke/Externe Laufwerke/Externe Laufwerke für OPC 5112 / 5115 / 5117 / IPC 1100 / CPC / PLC / OTC / ITC / VMT-Serie @ 0\mod_1158926656205_681.doc @ 880 @
7.2 E
XTERNAL DRIVES
By default, no drive for removable media (CD/floppy disk) is integrated in the device.
Additionally the system provides an USB interface, with which an external drive could be
connected. In this case, you'd have to ensure that the equipment used is suitable for use
in an industrial environment.
Warning:
Connecting or disconnecting of external drives during operation is inadmissible, since it
cannot be excluded that the drive is in use at this point in time. Data loss might occur if
not observed!
Pos: 35 /Datentechnik/Software / Treiber Installation/Installation des Betriebssystems/Installation des Bertiebssystems für/IPC 11/CPC/PLC/OTC/ VMT-Serie/OPC -Serie @ 0\mod_1159173231142_681.doc @ 926 @
30
/
COMPACT FLASH DRIVES
Compact flash memories with a storage capacity of at least 64 MB are
used. The capacity depends on the desired operating system and the
additional programmes to be installed.
A 2.5" hard disk with at least 20 GB (UDMA) is used. On delivery, the
hard disk is formatted in NTFS format (default for Windows XP).
Windows XP Professional
(IDE
)
INTERFACE
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Terminals VMT5017
Advertisement
Table of Contents
