Industrial PCs MCR5000
Part number: 215 010.P
I
NSTALLATION
Use the reverse order of steps in this description for re-installing the fuse.
Push the fuse into the retainer and push both components together back into the unit.
Activate the locking mechanism by using a suitable tool (screw driver) and slightly pushing
the fuse retainer in while twisting it into its initial position. Make sure to check that the fuse
retainer is properly positioned.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
:
42