Table of Contents
Advertisement
Industrial PCs MCR5000
5.2 USB
CONNECTIONS
The USB interfaces are used for connecting peripherals with USB connection.
PIN NUMBER
1
2
3
4
Note:
The USB interfaces may be locked using the Lock USB software tool. You'll find the
software and the documentation on the service CD.
T
USB
OP
One USB interface can be accessed from the front. The interface is located under a plastic
cover. The cover has a tab on the right, which is used for protecting the USB connection.
Note:
All USB interfaces available meet the USB 2.0 standard.
5.3 S
C
IM
ARD
The SIM card reader is currently under preparation for future use.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
SIGNAL NAME
VDC
D -
D+
GND
INTERFACE
R
EADER ACCORDING TO
ISO 7816
26
Advertisement
Table of Contents
