Table of Contents
Advertisement
Terminals VMT5017
6.3 USB
CONNECTIONS
The USB interfaces are used for connecting peripherals with USB connection. The interface
complies with the USB 2.0 standard.
PIN NUMBER
Note:
The
You'll find this software and the documentation on the service CD.
USB
CONNECTION ON THE FRONT PANEL
One USB interface can be accessed from the front. This interface is located under a plastic
cover beneath the display. The cover has a tab on the right-hand side, which is used for
opening. The plastic cover must properly be replaced and carefully closed after using the
USB interface, since otherwise the protection class of IP65 is no longer ensured.
Pos: 27 /Datentechnik/Schnittstellen/Externe Tastatur/Externe Tastatur für OPC / CPC / PLC / OTC / ITC / VMT-Serie / IPC 51/ 53/11/5500 @ 0\mod_1169193199871_681.doc @ 2206 @
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
SIGNAL NAME
1
2
3
4
USB
interfaces
may
VDC
D -
D+
GND
be
locked
using
the
Lock
USB
software
tool.
25
Advertisement
Table of Contents
