Konica Minolta bizhub 40p User Manual page 67

All factory default values are shown in bold.
JOB
TIME-
OUT
ETHER-
NET
Configuration Menu Overview
Settings
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
TCP/IP ENABLE
IP
ADDRESS
SUBNET
MASK
DEFAULT
GATEWAY
DHCP
Settings
YES/NO
If is selected, TCP/IP is enabled.
YES
If is selected, TCP/IP is disabled.
NO
Setting
000.000.000.000
Set the IP address for this printer on the
network.
Use the , ,
specify the value.
If the IP address is manually specified,
is automatically set to
DHCP/BOOTP
.
OFF
Setting
255.255.000.000
Specify the subnet mask for the network.
Use the , ,
specify the value.
Setting
000.000.000.000
Specify the IP address of the router if one
is on the network. Use the
and keys to specify the value.
Settings
ON/OFF
Select whether or not the IP address is
automatically acquired.
If is selected, the IP address is auto-
ON
matically acquired.
If is selected, the IP address is not
OFF
automatically acquired.
, and keys to
, and keys to
, ,
57
,