Konica Minolta bizhub 40p User Manual page 182

Symptom
Printing from
a USB mem-
ory device is
not possible.
Printing
takes too
much time.
Blank pages
come out
during print-
ing.
172
Cause
The file format (file
extension) is not one
that can be printed.
MEMORY DIRECT
for the printer is set to
.
DISABLE
A public user is not
specified for user
authentication.
The printer is set to a
slow printing mode
(for example, thick
stock or transpar-
ency).
The printer is set to
Energy Saver mode.
The job is very com-
plex.
The printer memory is
insufficient.
A toner cartridge for a
different region or an
unapproved genuine
toner cartridge is
installed.
The toner cartridge
may be defective or
empty.
The wrong media is
being used.
Solution
Only files with the format (extension)
for , ,
JPEG TIFF XPS
ported.
Change the setting for
MENU/MEMORY DIRECT
.
ENABLE
Contact the printer administrator.
It takes more time to print on special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
It takes time for printing to start in
Energy Saver mode. If you do not want
to use this mode, disable it. (
DEFAULT MENU/ENERGY SAVER
menu)
Wait. No action needed.
Add more memory.
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific printer.
Check the toner cartridge. The image
will not print if it is empty.
Check that the media type set in the
driver matches the media loaded in the
printer.
Solving Other Problems
, or are sup-
PDF
INTERFACE
to
SYS