Konica Minolta bizhub 40p User Manual page 56

46
PAPER
TYPE
SIZE
SET-
TING
Settings
TRAY
CHAINING
If
ON
paper during printing, a tray loaded with paper of the
same size is automatically selected so printing can
continue.
If
OFF
paper, printing stops.
TRAY TRAY
MAPPING MAPPING
MODE
LOGICAL
TRAY
0-9
Settings
ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper
loaded into Tray 4.
Settings
AUTO/USER SELECT
If is selected, the printer
AUTO
automatically detects the paper size.
If
USER SELECT
select the paper size.
ON/OFF
is selected and the specified tray runs out of
is selected and the specified tray runs out of
Settings
ON/OFF
Select whether or not the Tray Mapping
function is used.
Settings
PHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3/
PHYSICAL TRAY4
Select the tray that is used for printing
when a print job is received from another
manufacturer's printer driver.
The default setting for
is
2 PHYSICAL TRAY 2
settings for all other trays are
CAL TRAY 1
PHYSICAL TRAY3
PHYSICAL TRAY4
an optional lower feeder unit is
installed.
Configuration Menu Overview
is selected, a user can
LOGICAL TRAY
. The default
PHYSI-
.
and
appear only if