Konica Minolta bizhub 40p User Manual page 213

7
Mount the CF Adapter onto the
controller board as shown in the
figure, and then secure the
screws.
8
Fully insert the CompactFlash
card into the appropriate slot.
When the CompactFlash card is
correctly inserted, the button on
the side of the slot (circled in the
illustration) slightly pops out.
Before removing the Com-
pactFlash card, press this
button.
9
Reinstall the panel and tighten the two screws.
10
Attach the right side cover.
11
Reconnect all interface cables.
12
Reconnect the power cord, and
turn on the printer.
CompactFlash
203