Konica Minolta bizhub 40p User Manual page 57

DUPLEX
COPIES
COLLATE
FIN-
ISHING
Configuration Menu Overview
Settings
OFF/LONG EDGE/SHORT EDGE
If is selected, the pages will be printed on both sides
LONG EDGE
of the paper for long-edge binding.
If
SHORT EDGE
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu
setting.
Settings
1-9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu
setting.
Settings
ON/OFF
If is selected, all pages of the document are printed before the
ON
next copy is printed.
If is selected, all copies of the document are not printed
OFF
separately.
The setting specified in the printer driver will override this menu
setting.
This menu item appears only if an optional hard disk kit or a
CompactFlash card of 1 GB or more is installed.
Settings
SUB TRAY/MAIN TRAY/OFFSET
When
SUB TRAY
tray.
When
MAIN TRAY
put tray.
When is selected, the paper is fed to the sub output tray
OFFSET
with each copy slightly shifted.
The setting specified in the printer driver will override this menu
setting.
The paper size available for
follows:
Width: to
89
Length:
140
can be set only when
OFFSET
is selected, the pages will be printed on both
is selected, the paper is fed to the sub output
is selected, the paper is fed to the main out-
SUB TRAY
( to
216 mm 3.5
to (
356 mm 5.5
or
OFFSET
)
8.5 inches
to
14.0 inches
is .
COLLATE ON
is as
)
47