Konica Minolta bizhub 40p User Manual page 180

Symptom
Media is
misfeeding.
Media is
misfeeding.
170
Cause
The media is not cor-
rectly positioned in
the tray.
The number of sheets
in the tray exceeds
the maximum
allowed.
The media guides are
not correctly adjusted
to the media size.
Warped or wrinkled
media is loaded in the
tray.
The media is moist
from humidity.
Transparencies have
collected static elec-
tricity in the tray.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
The media roller is
dirty.
Solving Problems with Media Misfeeds
Solution
Remove the misfed media and reposi-
tion the media properly in the tray.
Remove the excess media and reload
the correct number of sheets in the
tray.
Adjust the media guides in the tray to
match the size of the media.
Remove the media, smooth it out, and
reload it. If it still misfeeds, do not use
that media.
Remove the moist media and replace it
with new, dry media.
Remove the transparencies and load
them in the tray one sheet at a time.
Do not fan transparencies before load-
ing them.
Use KONICA MINOLTA-approved
media.
See "Media Specifications" on page
84.
Clean the media supply roller.
For more details, refer to "Cleaning the
Feed Roller (inside the Tray)" on page
141.