Table of Contents
Advertisement
4.2.5 HighPoint RAID Drivers
If the hard drives connected to the RAID IDE connectors will be
configured as RAID, you must install the Highpoint RAID drivers.
1. On the left side of the autorun screen, click the "TOOLS" icon.
2. Click "HighPoint RAID Drivers" on the main menu. A "readme"
screen which contains the RAID drivers installation instructions
will appear.
The installation procedure will lead you to install the driver from
a diskette. The diskette is included in the system board package.
To install the RAID drivers:
1. Insert the "HighPoint 372 N RAID Drivers" diskette.
2. Follow the installation instructions shown on the screen.
3. Reboot the system for the driver to take effect.
Note:
Refer to the HighPoint RAID User's Manual for more informa-
tion about the RAID drivers. The manual is included in the CD.
4.2.6 HighPoint RAID Utility
This utility is used to configure and manage RAID on drives con-
nected to the RAID IDE connectors.
To install the utility, please follow the steps below.
1. On the left side of the autorun screen, click the "TOOLS" icon.
2. Click "HighPoint RAID Utility" on the main menu.
3. Follow the installation instructions shown on the screen.
4. Reboot the system for the driver to take effect.
Note:
Refer to the HighPoint RAID User's Manual for more informa-
tion about the utility. The manual is included in the CD.
Supported Software
4
9 9
Advertisement
Table of Contents
