Table of Contents
Advertisement
3
Award BIOS Setup Utility
3.2 HighPoint BIOS Configuration Utility
The HighPoint BIOS Configuration Utility is used to configure and
manage RAID on drives connected to the RAID IDE connector.
After you power up the system and all hard disk drives have been
detected, the boot ROM message screen will appear as shown
below.
Press the <Ctrl> and <H> keys simultaneously. The BIOS
Configuration Utility screen will appear.
88
Important:
Before you run the HighPoint BIOS Configuration Utility, make
sure the "HP372N RAID Control" field in the Genie BIOS
Setting submenu of the Award BIOS is set to Enabled.
Note:
Refer to the "BIOS Configuration Utility" section in the HighPoint
RAID User's Manual for information on using the utility. The
manual is included in the CD.
Advertisement
Table of Contents
