LanParty NFII Ultra A+ User Manual page 28

2
Hardware Installation
The system board supports 6 USB ports. USB allows data exchange
between your computer and a wide range of simultaneously
accessible external Plug and Play peripherals. You must have the
proper drivers installed in your operating system to use the USB
ports. Refer to your operating system's manual or documentation.
The system board is equipped with four onboard USB ports (Black).
The J9 connector on the system board allows you to connect to the
2 USB ports that are on the FrontX device. (The FrontX device,
which comes with LANPARTY series products, is installed at the
front panel of the chassis.) Connect the USB cable connector from
FrontX to J9. Make sure pin 1 of the cable connector is aligned with
pin 1 of J9.
28