Table of Contents
Advertisement
3.1.5.11 KB Power On Password
Move the cursor to this field and press <Enter>. Enter your
password. You can enter up to 5 characters. Type in exactly the same
password to confirm, then press <Enter>.
The power button will not function once a keyboard password has
been set in this field. You must type the correct password to power-
on the system. If you forgot the password, power-off the system and
remove the battery. Wait for a few seconds and install it back
before powering-on the system.
3.1.5.12 KB Power On Hot Key
This field is used to select a function key that you would like to use
to power-on the system.
3.1.5.13 PWR Lost Resume State
Keep Off
Turn On
Last State When power returns after an AC power failure, the
3.1.5.14 Power-On by Alarm
Enabled
Disabled
When power returns after an AC power failure, the
system's power is off. You must press the Power
button to power-on the system.
When power returns after an AC power failure, the
system will automatically power-on.
system will return to the state where you left off
before power failure occurs. If the system's power is
off when AC power failure occurs, it will remain off
when power returns. If the system's power is on
when AC power failure occurs, the system will power-
on when power returns.
When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on in the " Time (dd:hh:mm)" fields. However,
if the system is being accessed by incoming calls or
the network prior to the date and time set in these
fields, the system will give priority to the incoming
calls or network.
Disables the automatic power- on function.(default)
Award BIOS Setup Utility
3
75
Advertisement
Table of Contents
