LanParty NFII Ultra A+ User Manual page 22

2
Hardware Installation
If your reason for clearing the CMOS data is due to incorrect
setting of the processor's bus clock in the BIOS, please proceed
to step 4.
4. After powering-on the system, press <Del> to enter the main
menu of the BIOS.
5. Select the "Genie BIOS Setting" submenu and press <Enter>.
6. Set the "CPU Clock Setting" field to its default setting or an
appropriate bus clock. Refer to "CPU Clock Setting" in the
"Genie BIOS Setting" section in chapter 3 for more information.
7. Press <Esc> to return to the main menu of the BIOS setup
utility. Select "Save & Exit Setup" and press <Enter>.
8. Type <Y> and press <Enter>.
22