LanParty NFII Ultra A+ User Manual page 58

3
Award BIOS Setup Utility
field. Also, disable this field if you are installing or running certain
operating systems like Windows
operating system may not install nor work.
3.1.2.2 CPU L1 Cache and CPU L2 Cache
These fields speed up the memory access. The default value is
enabled. Enable the external cache for better performance.
3.1.2.3 Quick Power On Self Test
This field speeds up Power On Self Test (POST) after you power on
the system. When Enabled, the BIOS will shorten or skip some check
items during POST.
3.1.2.4 RAID or SCSI Card Boot
If you want the system to boot from a drive that is connected to
the RAID IDE connector or SCSI add-in card, you must first select
"SCSI" in the "First Boot Device" field.
If there are drives connected to both the RAID IDE connector and
SCSI add-in card, you must select which drive you want to boot.
RAID
SCSI
If the drive is connected to either one of them only, you don't need
to particularly select an option in this field because the system will
automatically detect for the existing drive.
3.1.2.5 First Boot Device, Second Boot Device, Third Boot Device and
Boot Other Device
Select the drive to boot first, second and third in the "First Boot
Device" "Second Boot Device" and "Third Boot Device" fields
respectively. The BIOS will boot the operating system according to
the sequence of the drive selected. Set "Boot Other Device" to
Enabled if you wish to boot from another device.
58
The drive is connected to the RAID IDE connector
that is on the system board.
The drive is connected to the SCSI add-in card that is
installed in a PCI slot.
® 95/98/2000/ME/XP or the