LanParty NFII Ultra A+ User Manual page 80

3
Award BIOS Setup Utility
3.1.7.3 +3.3V, +5V, +12V, -12V, VBAT(V) and 5VSB(V)
These fields show the output voltage of the power supply.
3.1.7.4 Shutdown Temperature
You can prevent the system from overheating by selecting a
temperature in this field. If the system detected that its temperature
exceeded the one set in this field, it will automatically shutdown. This
function will work only when you enable this function in the Winbond
Hardware Monitor utility.
80
Note:
The onboard hardware monitor function is capable of detecting
"system health" conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Winbond Hardware
Monitor utility. This utility is included in the CD that came with
the system board. Refer to the Winbond Hardware Monitor
section in chapter 4 for more information.